iDealTek's broad power supply product line and unique power supplies customization ability ensure that every customer can get an ideal & qualified power solution.
Overview
CCPS-3U series high voltage power supply uses a 19-inch 3U standard rack-mounted chassis, with an output power of up to 2KW and an output voltage level of 3KV / 4KV / 5KV / 10KV / 20KV, the high-voltage charging power supply has achieved a substantial increase in the charging capacity of the rack-mounted high-voltage charging power supply on the basis of maintaining high efficiency, high output response speed and faster protection and starting self-recovery.
The front panel of this series of high-voltage charging power supplies is controlled by a potentiometer with the LCD meters showing high-voltage output. This series of high-voltage charging power supplies can be equipped with RS485 interface and control software to control and monitor the operating parameters of the high-voltage power supply.
The power supply is equipped with more comprehensive protections to ensure long-term and reliable operation of the power supply at full load, such as: input phase loss, output overvoltage, overcurrent, over heat, short circuit protection, etc., and can also be equipped with a discharging circuit to deal with high-voltage charging and discharging conditions for effective protection of the high-voltage power supplies and the capacitors under test.
Features
Can be used as a HV DC power supply or as HV capacitor charging power supply.
Output voltage adjustable from 0 to 100%
Output power: Average charging @ 1KJ/S and the peak charging power can reach 2KW.
Charging in constant current mode and switch to constant current mode till fully charged.
Unique double isolated system, strong anti-interference ability.
Forced air cooling with rugged design.
Optional functions
0~10V analog signal control (+AC)
RS communication interface (RS232 / RS485 optional) (+RC)
Specifications | |||
Input | Connection mode | Single – phase, two – wire (PE) | |
Voltage | 220Vac±10% | ||
Frequency | 50Hz / 60Hz ± 10% | ||
Current | As per output power. | ||
Output | Rated power | 1KW ~ 2KW (Max.) available ** | |
Output voltage adjusting range | 3KV ~ 20KV available ** (For other output voltages, please contact us for details) | ||
Output current adjusting range | 0A ~ ****mA | ||
Output polarity | Positive or Negative (both available) Client must choose one output polarity before ordering. | ||
Working mode | Constant voltage (CV) / Constant current (CC) | ||
Accuracy (C.V.) | Line regulation | ≤0.2% FS ± 1 digit (Output voltage change rate only caused by changes of input voltage over ± 10% range of variation) | |
Load regulation | ≤0.3% FS ± 1 digit (Output voltage change rate only caused by full range load changes) | ||
Accuracy (C.C.) | Line regulation | ≤0.2% FS ± 1 digit (Output voltage change rate only caused by changes of input voltage over ± 10% range of variation) | |
Load regulation | ≤0.3% FS ± 1 digit (Output voltage change rate only caused by full range load changes) | ||
Temperature drift | ≤0.03% FS (Output voltage change rate every 8 hours after power on for half an hour) | ||
Ripple (p-p) | ≤0.5% FS (measured @ 80% ~ 100% rated output) | ||
Output cable | HV connector and line provided by IdealTek. | ||
Efficiency | ≥90% | ||
Setting & Display | Control mode | Local | 10-turn potentiometer on front panel. |
Remote (Optional) | RS485 communication interface. In line with MODBUS-RTU standard. The user can control and monitor the power supply via RS485 connection with computer, E.g: l Power ON / OFF l Output voltage & current setting & reading. l Working state monitoring (constant voltage, constant current, fault) | ||
Display mode | 41/2 LCD digital display | ||
Display error | ≤±0.5%FS ± 1digit (range: 50%~100% of the rated value) | ||
Display resolution | As per output voltage & current values. | ||
Protection & Monitoring functions | Output over voltage protection (OVP) | Power supply automatically cuts off output and alarms when output has over voltage. | |
Output over current protection (OCP) | Power supply automatically cuts off output and alarms when the output has over current. | ||
Over temperature protection (OTP) | Power supply automatically cuts off output and alarms when the internal temperature of the power supply exceeds its threshold value. | ||
Output short-circuit protection | Power supply automatically switches to CC working when the output has short-circuit. | ||
Over-loading capacity | Withstand working with 1.05 times of rated current. | ||
Noise | ≤65dB | ||
Protection degree | IP20 | ||
Cooling method | Forced air cooling. | ||
Inverter transient protection response time | ≤10us | ||
Working environment conditions | Ambient temperature | -5℃~+40℃ | |
Humidity | 10%~80%(non-condensing) | ||
Height | ≤1000m | ||
Location | Indoor use only No conductive dust, gas or steam that destroys the insulating medium No severe vibration and shock, good ventilation. | ||
Size (W*H*D) (mm) | 482*566.5*132.5 (19” 3U standard chassis) | ||
Weight | Approx. 25Kg | ||
Note: every power supply has 48 hours full load burn-in test @ 40℃ |
Safety caution
1.This power module has HV output, only professional person could operate it.
2.Please make sure of good grounding before operation.
3.Capacitor charging power supply has low internal stored energy, please NO no-loading working.
4.Keep power module clean and good ventilation.
5.HV input & output connectors or HV load no touch anything.